Products

33dBm Mobile Repeater GW-33G

Item No.: 00046
INQUIRY
Description Specifications

Model: 
33dBm, GW-33G



The Single-Band RF Repeater (RFR) is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in single wireless network. 
The Single-Band RFR is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction. 

As per operator's requirement for working frequency, two types of Single-Band RFR are available: 
*Band-Selective Single-Band RF Repeater: To amplify all signals in the whole band (bandwidth is customized); 
*Channel-Selective Single-Band RF Repeater: To amplify only the signals transmitted in the customized 1 / 2 /4 / 8/ 12 /16 channels. 

Features: 
* Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding; 
* Highly selective channel selector can process multiple channels simultaneously; 
* No interference to BTS by adopting linear amplifier with high gain and low noise; 
* Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink; 
* USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater. 

The RF Repeater is mainly applicable to such case: 
*The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation; 
*And the distance between the BTS and the area to be covered is 2km around. 

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RFR has the following benefits and disadvantages: 
Pro: 
Easy to build the installation site; 
Lower cost of equipment and site-building. 

Con: 
*Inappropriate installation may cause self-oscillation; 
*The Coverage Antenna shall face against the Donor Antenna, which limits the coverage angle; 
* High signal noise may be introduced since the Donor Antenna picks up signal from the air; 
*The repeater shall be installed within the coverage of BTS. 

Application: 
To expand signal coverage of fill signal blind area where signal is weak or unavailable. 
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways

 

Items

Testing Condition

Specification

Uplink

Downlink

850MHz Working Frequency

Nominal Frequency

824 – 849MHz

869 - 894MHz

  900MHz Working Frequency

     Nominal Frequency

890 – 915MHz

935 – 960MHz

2100MHz Working Frequency

Nominal Frequency

1920-1980MHz

2110-2170MHz

Gain(dB)

Nominal Output Power-5dB

85±3

Output Power (dBm)

GSM modulating signal

33

33

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-band(Max. Gain)

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

Packing

44x25x35CM

Weight

9KG

RF Connector

N-Female

Switch

Power Switch

Humidity

< 90%

Operating Temperature

-25 ºC  ~55 ºC

Environment Conditions

IP65