Model:
GW-15DRD
Features:
· High gain linear power amplifier technique with reliable performance
· In-built AGC & ALC function be able to ensure easy installation without setting.
· Compact size and light weight, easy to install on wall or pole
· Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink
· Support SNMP and Web-based GUI.
· RS232 or RJ45 ports provide links to laptop for local setting and monitoring by built-in web interface.
· Built-in wireless modem (Option) for remote monitoring by SMS, GPRS or TCP/IP.
· Details repeater parameters and status can be monitoring by built-in web interface, such as RSSI, temperature, output power level, gain, ATT, return loss, VSWR etc.
Digital Repeater is a new kind of RF Repeater that is adopting DSP (Digital Signal Processing) technology basis on FPGA platform, highly linear components and unparalleled innovative DSP filtering provide top level performance. Digital Repeater can be selected as Band Selective or Channel Selective operation mode, which supports up to 12 channels both on uplink and downlink. Using an advanced ALC mechanism, each one of the channels has an individual gain and ALC setting.
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
· Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots.
| Item | 1800 MHz |
| Pico | |
| DL | |
| Repeater type | Digital Filter Repeater (DFR), minimum 3 sub slot band |
| Frequency Work | 1805 - 1880 MHz (20 MHz freq window) |
| Input port repeater max | -65 dBm |
| Output port repeater max | 15 dBm |
| Gain max | 80 dB |
| Power Adjustment | 31 step / 1 dB |
| Isolation Min (dB) | 83 |
| UL | |
| Repeater type | Digital Filter Repeater (DFR), minimum 3 sub slot band |
| Frequency Work | 1710 - 1785 MHz (20 MHz freq window) |
| Input port repeater max | -75 dBm |
| Output port repeater max | 5 dBm |
| Gain max | 80 dB |
| Power Adjustment | 31 step / 1 dB |
| Isolation Min (dB) | 83 |
| VSWR | 1.1<=x<1.4 |
| Inter-modulation | Max -37dbm or -80dbc |
| Spurious Emission | Max -37dBm at +/- 750 kHz |
| I/O Impedance | 50 ohm |
| Noise Figure | Max 5dB |
| Group Time Delay | Max 4µS |
| Temperature Range | -25 degree Celsius to +55 degree Celsius |
| Relative Humidity | Max 95% |
| MTBF | Min. 100000 hrs |
| Connector Type | SMA-female w/ additonal adaptor SMA-male to N-female |
| ICS | No |
| ALC | Yes |
| AGC | Yes |
| AGC Control Range | Min 40dB (+/-1dB) |
| Gain Control Range | 31 step (1dB Step) |
| NMS based on Data service (include modem (2G/3G or 2G only (GSM/DCS or GSM only)*)) | No |
| GUI | Yes |
| Power Consumption | 25 W |
| Power Supply Type | Switching Regulator |
| UPS with casing (IP 65, repeater inside) | No Need |
| UPS Capacity | - |
| Antenna system (include accessories) | |
| Donor | |
| Type | Yagi (pig tailed N-female 30 cm) |
| Gain | > 10 dBi |
| Pole antenna (Ø 2" aluminium include bracket) | |
| Serving | |
| Type | Mounted/Spliting |
| Gain | > 3 dBi |
| Pole antenna (Ø 5" aluminium include bracket) | - |
| Installation part | |
| Cable RG8 length | 80 m |
| Connector N-male RG8 | 10 pcs |
| MCB with box | No need |
| Power cable 3wire w/ stop contact | 10 meter |
| Installation local material (ties cable, rubber, isolatif 3M, sticker Isat, cable clamp etc) | 1 package |
